Kit de humidificador

Humidifier kit

The range of kits for OEM humidifiers are intended to be a universal, flexible and simple solution for all manufacturers' needs.

The kit for OEM humidifiers includes a cylinder, hydraulic parts and some electrical components. They are supplied without a board in order to adapt better to most applications. The OEM kits are ideal for use in air handling systems due to their small size and flexibility of the system. The range includes products from 1.5 kg / h to 45 kg / h. All models work with water from the network and it is possible to choose between cylinders for low, medium and high conductivity.

All humidifiers in the OEM range must work with a control unit, either On-Off or proportional. This guarantees an accurate production in proportion to a signal received from the external controller.

All OEM humidifiers must have a universal TAM (Current Transducer).


  • Operating conditions: 1T40 ° C, 10 ... 90% U.R. no condensation
  • Storage conditions: -10T70 ° C, 5 ... 95% U.R. no condensation
  • Nominal steam production: from 1.5 to 45 kg / hr, depending on the model
  • Number of cylinders: 1
  • Hydraulic parts and the controller are sold separately for greater freedom of installation in confined spaces
  • The AFS system (Antifoam System): detects and manages the foam to avoid the emission of drops with the steam;
  • Cylinders with galvanized electrodes and anti-lime filter in the lower part; cleanable cylinders also available;
  • Steam production with continuous modulation from 20% of the nominal capacity;
  • Integrated conductivity sensor and control software to optimize energy efficiency and maintenance costs with constant performance over the life of the cylinder.
  • Automatic water drain after 3 days of inactivity.

  • CPY is the latest driver for OEM KUE kits.
  • The same model is suitable for all KUEs.
  • CPY has the following characteristics: Wide range of modulation (20 to 100%): Input from 0 to 10 V, 2 to 10 V, 0 to 20 mA, 4 to 20 mA or ON / OFF.
  • All the parameters of the user can be modified by the optional terminal or by the network Intelligent dilution drains for an efficient behavior of energy saving
  • Anti-foam system (AFS) Complete drainage in case of lack of demand configurable by the user to avoid standing water in the cylinder
  • It can be controlled through the RS485 serial port either through the CAREL protocol itself or Modbus®


General Features